Jacquard fabric classification

The monochromatic jacquard is a jacquard dyed fabric - the jacquard fabric is woven by the jacquard weaving machine and then dyed and finished. The finished fabric is solid color; the multi-color jacquard is a yarn-dyed jacquard fabric - the first yarn is dyed and then the jacquard weaving machine Made of, and finally finishing, so the yarn-dyed jacquard fabric has more than two colors, the fabric is rich in color, not monotonous, the flower has a strong three-dimensional sense and a higher grade. The width of the fabric is not limited, the cotton fabric has a small shrinkage, no ball, no fading. Jacquard fabrics can generally be used in high-end clothing production materials or decorative materials (such as curtains, sofa cloth materials) jacquard fabric manufacturing process is complex. The warp and weft yarns are intertwined and uplifted to form different patterns, and the unevenness is obvious. The beautiful patterns such as flowers, birds, fish, insects, birds and beasts are woven.

Soft, delicate, smooth and unique texture, good gloss, good drape and breathability, high color fastness (yarn dyeing). The pattern of the jacquard fabric is large and exquisite, the color layer has a distinct three-dimensional effect, and the pattern of the small jacquard fabric is relatively simple and relatively simple.

Satin Jacquard fabric (cloth): The warp and weft yarns are interlaced at least once, so the satin weave makes the fabric denser, so the fabric is thicker. Satin tissue products cost more than similar plain and twill weave products. Fabrics woven from satin weave are collectively referred to as satin fabrics. The satin fabric has the front and back sides, the least interlacing point in a complete tissue loop, the longest float line, and the fabric surface is almost entirely composed of warp threads in the warp or weft direction, and the satin fabric is soft in texture. The satin fabric has the front and back sides, and the fabric is smooth and delicate. The most common satin fabric is striped satin, referred to as satin. Divided into 40 pieces of 2 m 4 wide satin strips and 60 pieces of 2 m 8 wide satin strips. First weaving and dyeing process, the fabric is generally solid and extends as a horizontal strip. The cotton fabric has a small shrinkage, no ball, and is not easy to fade.

Satin jacquard fabric (cloth)

"Knitting satin jacquard fabric" knowledge.

First of all, please understand these three concepts: plain, twill, satin.

Plain weave: A fabric woven from plain weave is called plain weave. That is, the warp and weft yarns are interlaced once every other yarn (that is, the yarn is 1 upper and lower). The characteristics of this kind of cloth are that there are many interlacing points, the texture is firm, the blade is smooth, the surface is flat, and the high-grade embroidery fabrics are generally plain fabrics.

Twill: The warp and weft yarns are interlaced at least once, ie 2 up 1 or 3 up 1 down. The fabric structure is changed by adding warp and weft interlacing points, collectively referred to as twill fabric. The characteristics of this cloth are relatively thick and the tissue has a strong three-dimensional effect. There are 30, 40, and 60 counts.

Satin cloth: The warp and weft yarns are interlaced at least once, so the satin weave makes the fabric denser, so the fabric is thicker. Satin tissue products cost more than similar plain and twill weaves, and the fabric is smooth, delicate and shiny. Plain, twill, and satin are the most basic three latitude and longitude interlacing methods. There are no specific good or bad points here, each with its own characteristics. Among them, the satin is definitely a fine product in pure cotton fabric.

Let's talk about the satin.

The satin has to distinguish four concepts: satin, satin, satin, satin jacquard.

What fabric is satin? In fact, through the introduction just now, you have already understood that "plain, twill, and satin" are all fabrics, not specific fabrics.

The most common satin fabric is striped satin, referred to as satin. The grain is extended by a horizontal bar (see figure). The fabric is generally solid color using a woven and dyed process. Can not afford the ball, not easy to fade.

There is also a satin called satin, which is also a solid color, which is a lattice (see photo).

Satin and satin are generally used as raw materials for hotel bedding. They are inexpensive and luxurious. Satin and satin are also used as home kits, but far less than satin jacquard fabrics are popular.

Jacquard fabric: The pattern on the fabric is woven, not ordinary printing, nor embroidered. When the fabric is woven, the warp and weft structure is used to form a flower pattern, the yarn count is fine, the needle thread density is high, the shape is not deformed, the color is not faded, and the comfort is good. At present, jacquard is very popular in the market, and the satin bedding products are of a high grade and taste. To distinguish the quality of the satin is to compare the yarn count and density.

The satin also talks about the number of yarns. Let's talk about the count, which is what we often see 30, 40, 60, etc! For example, 30 friends also call it 30S, that is the same, no difference! So what is the count? I understand this:

The count is the standard for the thickness of the yarn. For example, one gram of cotton can be made into 30 yarns of 1 meter, that is 30, and one gram of cotton can be made into 40 yarns of 1 meter, that is 40; one gram of cotton can be made into 60 pieces. The yarn of 1 meter long is 60 pieces. In fact, the higher the yarn count, the finer the yarn. The thinner the yarn is, the softer and more comfortable the cloth is. However, the high count of the fabric requires high quality of the raw material (cotton), and the requirements for the spinning mill and the textile weaving factory are relatively high, so the cost of the cloth is relatively high. The high-yarn cloth is not suitable for bedding because it is too thin!