Several Quality Problems That Are Easy To Produce In Spinning Production
Oct 22, 2019
1.1 The danger of neps
The number of neps in the spun yarn not only affects the appearance quality of the spun yarn and the natural cotton fabric, but also directly affects the coloring effect of the fabric, resulting in dyeing. As people demand higher and higher quality of the fabric, the neps Has been listed as an important point of manipulation.
1.2 Formation and distribution of neps
(1) There are many harvesting methods for cotton to produce neps impurities in raw cotton. The current harvesting methods are roughly divided into manual picking and mechanical harvesting methods. Foreign artificial harvesting methods are mainly used for picking long-staple cotton and fine-staple cotton. Mainly mechanized harvesting, mechanical harvesting brings a lot of impurities to the lint, and even a small amount of neps, which makes it difficult for the ginning factory to remove impurities, and also makes a certain amount of neps in the raw cotton after ginning. .
(2) It is contradictory to remove the impurities in the raw cotton and increase the neps and short velvet in the production of clean cotton. The faster the speed of the open cotton, the better the impurities are removed, and the longer the process of increasing the cleaning production line, The more the neps are added. Therefore, we must strive to open a short process of cleaning cotton production line, optimize the process technology of removing impurities and producing neps, and strive to increase the number of neps and short piles in the open cotton.
(3) The greater the proportion of immature fibers in raw cotton, the more chances of producing neps and lint. It is necessary to manipulate the distribution of immature fibers before the raw cotton enters the clean cotton production line, and reduce the immature fibers in the mix. The proportion and difference in cotton.
(4) The carding machine is the main process to reduce the neps. Many neps can be combed or dismantled on the carding machine. Therefore, the carding machine should be four-speed and one-time, strengthen the carding, special cover and tin. The carding function between the forests should be strengthened. The new carding machine is equipped with a fixed cover plate, which improves the cleaning function and the carding effect of the feeding part, which are very important for reducing the neps.
(5) On-line and off-line monitoring and manipulation of cotton neps in raw cotton, so that the increase in the number of neps in production is controlled. The AFis raw cotton property tester can be used to check the percentage of immature fibers and the total amount of neps in the raw cotton. Exceeding the specified indicators should be eliminated, so that the number of cotton knots can be manipulated in the process of opening and combing. New carding machines such as DK803, DK903, DC03, etc. can also detect the dynamic changes of the neps online, which can be increased according to the neps. Over-limit condition alarm, automatic adjustment cover and cylinder spacing, automatic grinding of the cover plate to stabilize product quality.







